Store

 

Giraffes Metal Sculpture, Haiti Metal Wall Art 23" x 22.5"

A well-crafted piece of original folk art from Haiti. This is a hand-crafted original piece of Haitian metal art, made from discarded steel drums and brought to you through fair trade practices. It is created in traditional fashion; the artist utilizing simple hand tools for both the cutwork on the recycled metal and also the intricate detailing. A protective, weather-proof coating has been applied, making it suitable for display indoors or out. Though it is protected with a weather-proof finish, this sculpture will rust over time, if exposed to outdoor weather. To prevent this from happening, grab a can of spray on enamel at the hardware store and go to it. Once a year should be plenty. It's a snap! It's easy to hang your sculpture with just a few nails. Place the first nail within two design elements that are touching or notched. Then use a second and possibly a third nail, if the sculpture is large, to straighten and secure the piece against the wall. Just make sure that you don't place a nail in an eye or a mouth. A viewer's attention will go there quite naturally and therefore, directly to the nail. You don't want that!

$79.00
 
 

Related Products

Global Crafts Metal Wall Art - 24 Inch Tree of Life with Buds - Haiti

Global Crafts Metal Wall Art - 24 Inch Tree of Life with Buds - Haiti
$55.31

Decorate any wall with a beautiful handmade wall hanging from Haiti. This stunning piece of decorative art shows a detailed Tree of Life with Buds. It is crafted of recycled oil drums. Wall hanging measures approximately 24 inches in diameter. Piece is made from recycled oil drums in Croix des Bouquets, Haiti by the artist Carlos Brutus. It is 24 inches in diameter. These pieces are representative of the spirituality of Haitian culture.

Sea Turtle, Metal Wall Art, Handmade in Haiti, Steel Drum Art 6" X 17"

Sea Turtle, Metal Wall Art, Handmade in Haiti, Steel Drum Art 6" X 17"
$32.95

All it takes to hang this metal sculpture is a few nails and a little know-how. Here's the know-how part: Place the first nail within a closed or notched design element and hammer it into the wall. Using a second and even a third nail - if the sculpture is large - to straighten and secure the piece. Then, stand back and admire your work. That's it! Though it is protected with a weather-proof finish, this sculpture will rust over time, if exposed to outdoor weather. To prevent this from happening, grab a can of spray on enamel at the hardware store and go to it. Once a year should be plenty. It's a snap! In the village of Croix-des-Bouquets, Haiti, the air rings with the sound of metal banging against metal. Workshops line the streets of the village and outside each are stacks of discarded 55-gallon drums awaiting transformation. To begin the process, the tops of the barrels are removed and the open barrel is stuffed with straw and dried banana leaves and then set ablaze. This burns out the residue and old paint and strengthens the metal. After the barrels have cooled, they are slit down the side, pried open, pounded flat and sanded down, giving the artist a smooth flat surface, much like a painter's canvas. The artist chalks his design onto the metal and then, using a hammer and chisel, begins the work of cutting the sculpture and giving it form, detail and dimension. When he is satisfied with his results, he pounds his signature onto the sculpture and seals it with a protective, weather-proof finish.

Haitian Recycled Metal Art - 5 Small Birds Flying

Haitian Recycled Metal Art  - 5 Small Birds Flying
Was: $45.95 Now: $38.50

To begin the process, the tops of the barrels are removed and the open barrel is stuffed with straw and dried banana leaves and then set ablaze. This burns out the residue and old paint and strengthens the metal. After the barrels have cooled, they are slit down the side, pried open, pounded flat and sanded down, giving the artist a smooth flat surface, much like a painter's canvas. The artist chalks his design onto the metal and then, using a hammer and chisel, begins the work of cutting the sculpture and giving it form, detail and dimension. When he is satisfied with his results, he pounds his signature onto the sculpture and seals it with a protective, weather-proof finish.

 
 
 
 

Pin It on Pinterest

Share This