Store

 

Peacock, Full Feathered Wall Decor, Recycled Metal Art, 23 in. X 23 in.

It's Cactus Metal Art Haiti This sculpture has been finished with a clear enamel coating, which will protect it from the elements. However, if it is displayed outdoors, we recommend applying a spray-on clear coat in order to maintain it's fresh-out-of the box look. Five minutes once a year is all it takes. Easy!The traditional Haitian method of creating metal sculptures from discarded oil drums has changed very little since the technique was first developed by Georges Liataud in the 1950's. To begin, the drums are burned out, cleaned up, sanded down and pounded flat. Next, the artist chalks his intended design onto the prepared metal and begins the heavy and tedious work of cutting and detailing, using only a hammer and chisel.Hanging your metal art is easy, once you know how. Choose a place it within two design elements that are touching or notched toward the center of the piece and drive a nail into the wall at that point. Using a second and possibly a third nail, place those in other notched areas within the design to secure it firmly. Avoid placing nails in the eyes or mouth.

0.00
 
 

Related Products

Talking with Fish, Mermaid, Artistic Haiti Metal Steel Drum Art 17 x 10 Inches

Talking with Fish, Mermaid, Artistic Haiti Metal Steel Drum Art 17 x 10 Inches
$32.95

It's easy to hang your sculpture with just a few nails. Place the first nail within two design elements that are touching or notched. Then use a second and possibly a third nail, if the sculpture is large, to straighten and secure the piece against the wall. You want the nails to "disappear" into the sculpture - and they will. Like magic... Worried that your metal sculpture will rust if exposed to the elements? Don't be. Your sculpture comes with a weather-proof coating that will wear off over time, but you can protect it easily by spending 5 minutes once a year to spray it with clear enamel available at your local hardware store.The traditional Haitian method of creating metal sculptures from discarded oil drums has changed very little since the technique was first developed by Georges Liataud in the 1950's. To begin, the drums are burned out, cleaned up, sanded down and pounded flat. Next, the artist chalks his intended design onto the prepared metal and begins the heavy and tedious work of cutting and detailing, using only a hammer and chisel. Finally, the sculpture is sealed with a weather-proof finish, so that the sculpture may be displayed easily indoors or out.

Haitian Metal Art - Angel and Birds - 23" x 23"

Haitian Metal Art - Angel and Birds - 23" x 23"
$69.00

Each unique fair trade metal sculpture is hand- cut from recycled 55- gallon steel drums. To begin the process, both ends of the drum are removed and placed inside of the remaining cylinder, along with scrap paper and dried banana or sugar cane leaves. Next, the contents are set ablaze to burn off any paint or residue and strengthen the metal. When cooled, the drums are sliced down the side and flattened, effectively creating a "steel canvas" of approximately 3' x 6', upon which the design is drawn. Using a hammer, chisel and various other primitive tools, the desired image is cut out and decorative patterns are pounded into the metal. Finally, a weather-proof finish coating is applied, making these fascinating pieces of folk art perfect for displaying indoors or out. Haitian metal sculptures all come with a clear, weather-proof coating but if exposed to the elements, they will begin to rust over time. This isn't necessarily a bad thing, but if it's not the look you're going for, fear not. Just pick up a can of spray on enamel clear coat and go to it. Once a year will do it. Piece of cake!It's easy to hang your sculpture with just a few nails. Place the first nail within two design elements that are touching or notched. Then use a second and possibly a third nail, if the sculpture is large, to straighten and secure the piece against the wall. Just make sure that you don't place a nail in an eye or a mouth. A viewer's attention will go there quite naturally and therefore, directly to the nail. You don't want that!

Haitian Metal Art - Tree of Life

Haitian Metal Art - Tree of Life
0.00

In a design reminiscent of a quilt pattern, this pair of love birds perched in a tree is a terrific gift idea for a bridal shower, wedding, or anniversary. Size: 11" X 13

 
 
 
 

Pin It on Pinterest

Share This